Banners

LARGE FORMAT DIGITAL PRINTING

The Teardrops

Specifications MATERIAL airtek or lite polyester PRINT digital, dye-sublimated print BASE bearing ground peg DISPLAY DIMENSIONS 2 m x 0.94 m 2,9 m x 1,15 m 3,8 m x 1,175 m STORAGE DIMENSIONS 1.2 m x 0.25 m x 0.1 m WEIGHT - 2 m TEARDROP 1 Kg WEIGHT - 2,9 m TEARDROP 2.5 Kg WEIGHT - 3,8 m TEARDROP 2 Kg

This patented product gets its name from the unique teardrop shaped banner surface. They have a high visibility where the message is always visible, unlike flags. Teardrops can be used both indoors and outdoors, and are able to handle high winds. Teardrops are supplied with a protective carrier bag. The non-rust hardware can accommodate multiple faces which makes use of a unique digitally printed polyester fabric. The goose neck's unique design allows less strain on the banner fabric which in turn helps the product stand up to strong winds and last longer.

The Telescopics

Specifications MATERIAL airtek or lite polyester PRINT digital, dye-sublimated print BASE ground peg with heavy duty spring DISPLAY DIMENSIONS 2 m x 0.94 m 3,5 m x 1,15 m 4,3 m x 1,175 m STORAGE DIMENSIONS - 2,8 m Telescopic 1.1 m x 0.2 m x 0.1 m WEIGHT - 2,8 m Telescopic 2,6 Kg STORAGE DIMENSIONS -3,5 m Telescopic 1.6 m x 0.2 m x 0.1 m WEIGHT - 3,5 m Telescopic 4,3 Kg STORAGE DIMENSIONS - 4,3 m Telescopic 1.6 m x 0.2 m x 0.1 m WEIGHT - 4,3 m Telescopic 4,8 Kg

Available in a variety of sizes, the telescopic is perfect for outdoor branding and exposure. They are very durable, lightweight and easy to install. The strongest bannerflags by far. Telescopics are printed on an Airotek or Polyester. A protective bag is included.

The Feather

Specifications MATERIAL airtek PRINT digital, dye-sublimated print BASE bearing ground peg DISPLAY DIMENSIONS 1,9 m x 1 m STORAGE DIMENSIONS 1.1 m x 0.95 m x 0.2 m WEIGHT 3 Kg

This patented product provides portable instant advertising, giving excellent exposure, indoors and outdoors. It is very strong which makes it perfect for high wind venues, such as the beach and sporting events. The lightweight frame keeps the tension on the print, and the message is permanently visible. A protective carry bag is provided. Packing up the Feather Banner

The Outdoor Bannerstand

Specifications MATERIAL ferrari PVC PRINT digital, dye-sublimated print BASE outdoor, domed hollow base DISPLAY DIMENSIONS 2 m x 0.7 m STORAGE DIMENSIONS 1.1 m x 0.55 m x 0.35 m WEIGHT 5 Kg

The Outdoor Bannerstand with it's unique shaped base is suitable for outdoor use in light wind conditions. It is ideal for outdoor retail shops, outdoor restaurants and waterfronts. Provides good exposure and is easy to install as it is lightweight as well as strong.

The A-Frame

Specifications MATERIAL ultra smooth PVC PRINT digital print BASE a-frame and ground pegs DISPLAY DIMENSIONS 2 sides 3 m x 1 m STORAGE DIMENSIONS 1.5 m x 0.3 m x 0.2 m WEIGHT 7,5 Kg

Stretched on a durable, lightweight aluminum frame, the A-frame provides excellent double-sided exposure, especially at beach events, golf days and other outdoor sporting events. It can also be used vertically indoors with great 3-sided effect for displays. The printed area is on re-inforced PVC and is weatherproof. It is portable, lightweight, easy to install. Once folded in it's bag it fits into the boot of your car.

The Pop-ups

Specifications MATERIAL UV coated material PRINT digital, dye-sublimated print BASE ground pegs DISPLAY DIMENSIONS 2 sides 2,7 m x 1,1 m 2 Sides 1,9 m x 0,9 m STORAGE DIMENSIONS - 2,7 m x 1,1 m 1,2 m x 1,1 m x 0.25 m WEIGHT - 2,7 m x 1,1 m 3,8 Kg STORAGE DIMENSIONS - 1,9 m x 0,9 m 0,85 m x 0,85 m x 0.1 m WEIGHT - 1,9 m x 0,9 m 2,5 Kg

This patented highly portable, instantly-erectable and -collapsible, lightweight, ova-lshaped, pop-open panel kit is supplied in a carrier bag. The bag can accommodate more panels should this be required. The compactness when folded up enables a number of units to be transported in the boot of a car.

The Clipframes

Specifications MATERIAL laminated satin non-tear paper (indoor) UV resistant vinyl (outdoor) Backlit (lightboxes) PRINT digital print BASE various bases available DISPLAY DIMENSIONS A5 - A0 or custom made to your requirements STORAGE DIMENSIONS depentant on size WEIGHT depentant on size

Clip frames can be made up to your specifications, using a variety of sizes, colours and extrusions (small, medium & large). They are ideal for indoor print and display, and is perfect for interchanging posters Clip frames are available as poster holders, a-frames, sandwich boards and single or double legged stands

The Tie Up Banner

Specifications MATERIAL ultra smooth PVC PRINT digital print BASE not applicable DISPLAY DIMENSIONS minimum size 500 mm x 500 mm STORAGE DIMENSIONS depentant on size WEIGHT depentant on size

The original PVC outdoor banner.

It is lightweight, portable and inexpensive. It has a maximum width of 1,5 metres and can be of any length. The banner is re-usable and convenient. It consists of 550g reinforced PVC and UV protected inks, and can be full colour digital or screen-printed

Warp Five Range

The Retracta

Specifications MATERIAL polycotton PRINT digital, dye-sublimated print BASE retractable base DISPLAY DIMENSIONS 2,2 m x 0,85 m STORAGE DIMENSIONS 0,86 m x 0.15 m x 0.15 m WEIGHT 3,585 Kg

The Warp Five Retracta can be set up in under 60 seconds, providing instant hasslefree representation. Images can be replaced, providing flexibility and years of service. The Warp Five Retracta is small and light enough to be accepted as carry-on luggage by airlines. This unit can be used individually or in conjunction with other Warp Five Retracta units to create a continuous wall.

The Wind Vane

Specifications LONGEVITY between 1 and 3 years MASS OF ROTATING SYSTEM 2 Kg MASS OF BASE 3,5 Kg (ecxluding water) MASS OF SUPPORT POLE 0,7 Kg DIMENSIONS 1 m x 0,5 m x 0,08m MAINTANANCE none - bearings are factory lubricated MAX WIND SPEED wind tunnel tested to over 60 kph ENVIRONMENTAL TEMPERATURE RANGE -25 ºC to +40 ºC ULTRA VIOLET PROTECTION capping strips - UV inhibited side strips - UV inhibited printed section - UV stabilised ink powder coating - UV resistand RUST PROTECTION steel ware - electroplated screws - electroplated PRODUCTION SPECIFICATIONS METHOD OF PRINTING silkscreen, digital printing LINE SCREEN 55 Screen MATERIALS USED ABS plastic, styrene, polystyrene MANUFACTURING LEAD TIME qty: 1000 = 6 weeks qty: 2000 = 8 weeks TIME ON WATER 4 weeks NUMBER PER BOX 5

The Warp Five Windvane is an internationally patented wind-driven advertising device. Designed to start rotating at exceptionally low wind speeds, and maintain low revolutions even at high wind speeds. It is this continuous motion that creates instant attention, and breaks through the existing advertising clutter. Windvanes are printed in four or more colours on both sides, and are utilised outside shops, on pavements and service station forecourts.

The Bannerstand I

Specifications MATERIAL mesh PVC PRINT digital printt BASE metal foot DISPLAY DIMENSIONS 2,2 m x 0,85 m STORAGE DIMENSIONS 0,95 m x 0.15 m x 0.15 m WEIGHT 2,8 Kg

The Warp Five Banner I is and exceptionally simple, light and compact system, available in straight sections. The banner utilises a low profile foot and spring loaded vertical tension system, that reduces setup effort. This unique tension design ensures that the graphic is tensioned correctly and vertically. Images can be easily replaced.

The Bannerstand II

Specifications MATERIAL ferrari PVC PRINT digital printt BASE metal foot (convex, straight, concave) DISPLAY DIMENSIONS 2,2 m x 0,85 m STORAGE DIMENSIONS 0,95 m x 0.15 m x 0.15 m WEIGHT - CONCAVE 4,2 Kg WEIGHT - STRAIGHT 3,1 Kg WEIGHT - CONVEX 3,2 Kg

The Warp Five Banner II is a revolutionary new-patented banner concept that offers the aesthetic advantages of curves. A choice of magnetic or mechanical joining system allows the user to change the shape of the image from straight, to convex. The image is attached to a plastic extrusion that slides into the main curved aluminium extrusion, rendering this system particularly useful for use with material and die-sublimation.

The Wind Flag

Specifications LONGEVITY between 1 and 3 years MASS OF BASE 3,5 Kg (ecxluding water) MASS OF SPIKE 0,85 Kg MASS OF SUPPORT POLE 0,7 Kg WING FLAG DIMENSIONS 1m wing flag: 1 m x 0,42 m 1,25m wing flag: 1,25 m x 0,42 m 1,5m wing flag: 1,5 m x 0,38 m 2,5 m wing flag: 2,5 m x 0,5 m MASS OF ROTATING SECTIONS 1m wing flag: 2,085 Kg 1,25m wing flag: 0,9 Kg 1,5m wing flag: 1,08 Kg 2,5 m wing flag: 1,8 Kg MAINTANANCE none - bearings are factory lubricated ENVIRONMENTAL TEMPERATURE RANGE -25 ºC to +40 ºC ULTRA VIOLET PROTECTION printed section - UV stabilised ink powder coating - UV resistand RUST PROTECTION steel ware - electroplated screws - electroplated PRODUCTION SPECIFICATIONS METHOD OF PRINTING silkscreen, digital printing, dye sublimation MANUFACTURING LEAD TIME qty: 1000 = 5 weeks qty: 2000 = 6 weeks

The Warp Five Wing Flag is a new internationally patented wind-driven advertising device. Wing Flags are utilised outside shops, on pavements and service station forecourts. The Wing Flag can be used either in isolation or in groups of two or more. It is designed to utilise a variety of substrates such as ABS or die-sublimated material. This makes the Wing Flag highly versatile enabling the user to have a different image on each side as well as making diecut shapes feasible. The Wing Flag image can be removed and replaced with new graphics as desired making it extremely useful with promotions that change regularly.

The Banner Wall

Specifications MATERIAL ferrari PVC PRINT digital printt BASE metal foot (convex, straight, concave) DISPLAY DIMENSIONS 2,2 m x 0,85 m STORAGE DIMENSIONS 0,95 m x 0.15 m x 0.15 m WEIGHT - CONCAVE 4,2 Kg WEIGHT - STRAIGHT 3,1 Kg WEIGHT - CONVEX 3,2 Kg

The Warp Five Banner II is a revolutionary new-patented banner concept that offers the aesthetic advantages of curves. A choice of magnetic or mechanical joining system allows the user to change the shape of the image from straight, to convex. The image is attached to a plastic extrusion that slides into the main curved aluminium extrusion, rendering this system particularly useful for use with material and die-sublimation.

Please use the Contact Us link on our site to place your enquiry. We will respond with quotes or arrange for one of the Sisco Account Directors to call and arrange a meeting to show you the full range of products available.